Kit A
(Starter - chassis and GRP kit)
Price
2259 EURO
(less 140 Euro in case customer
supplies exchange rear axle)
|
Requires a Lada donor vehicle for drive
train and axles +
aluminium body panels + wiring, piping, ancillaries,
trim, etc
includes
- Complete steel chassis powder painted, including
suspension and engine brackets, front bulkhead
and
footwell panels, rear steel bulkhead, steel
transmission
tunnel sides, rear wing supports, rear suspension
side
panels (c12).
- Set of front wishbones (4) (c211, c212)
- s/h Lada rear axle: axle tube and backplate surfaces are
cleaned and painted and ESTfield brackets are
fitted (c322)
- Set of rear trailing arms (4) (c221).
- Panhard rod (c222).
- 6 piece fibreglass body panel set ready for
priming (b111-
b114).
|
|
Kit B
(Rolling chassis and GRP body kit)
Price
3220 EURO
|
Requires drive train,
brakes, aluminium body panels, wiring,
piping, ancillaries, trim, etc.
includes
- Kit A
+
- recon. modified front axles consisting of Lada
uprights, hubs, and shortened steering arms
- new bearings included (c311-c314)
- new Lada and Ford ball-joints (c315, c316).
- complete poly or metallastic bush set (c215, c227
or c317, c324)
- Front and rear coil over shock absorbers (Sachs
hydro/
pneumatic) and coil springs (c213, c224).
- Set of necessary bolts, nuts, and washers
|
|
Kit C
(Complete rolling chassis and body kit)
Price
5135 EURO
|
Requires drive-train, wiring, piping,
trim, ancillaries, etc. includes
- Kit B
+
- Lada brake calipers, complete with pads, pins,
and
fixing plate. (c423, c421)
- Set of aluminium body panels (sides, rear,
bonnet) (b121-b123)
- Floor (marine ply + aluminium) (b124)
- Modified Lada pedal box and new main cylinder
(non-servo)
(c411, c412)
- Rear brakes (new linings, drums, cylinders)
(c432-c434)
- GRP formula seats (2) (a16)
- S/s rollover bar with 2 additional supports (a11)
- Aluminium fuel tank (a13)
|